|
Post by toyzone on Sept 24, 2005 16:32:58 GMT
Hi, Replaced both ink cartridges, colour is too yellow. Followed all the cleaning instructions, have not yet removed the print head, any advise please, is there any further cleaning that can be done? need to print some photo's. thanks
|
|
|
Post by NHH on Sept 25, 2005 12:59:35 GMT
Sounds as if there's something blocked, more often than not in this case just keep running the head cleaning cycle and print a test sheet after each one. Normally you'll see a slight improvement on each test print. Carry on doing this until the printed colours are how they should be.
If things don't improve and the print head is well & truly clogged then it'll be a case of chucking the printer and getting a new one. The Canon i250 was an entry level printer which only cost £40 new last year, therefore if anything goes permanently wrong there's no point in trying to get one repaired.
|
|